DCM-2605 / DCM-2608 Digital Clamp Meters Product ID: DCM-2605, DCM-2608

The DCM 2605 and DCM 2608 are clamp multimeters manufactured by TECPEL®.

The DCM 2605 operates on various DC and AC voltage ranges and its resistance range is at 200Ω,200KΩ, ±(1.0%+ 3dgts). It runs on a single 9V battery and has an audible indication of less than 30Ω of continuity test. It measures 10.9"x4.0"x1.9" (277x102x49mm) and weighs 18.9 oz/540g. It comes with several accessories such as a battery, soft carrying case, an owners manual and test leads.

The DCM 2608 offers a SC voltage range of 400mV,4V,40V,400V,1000V, ±(0.5%+1dgt) and an AC voltage range of 400mV,4V,40V,400V,750V,±(1.5%+4dgts).

Digital Clamp-on Meters
1000A AC/DC Amp +Frequency

Model:DCM-2605

Features :
1. 3 1/2 digit display
2. AC/DC current up to 1000A
3. AC voltage up to 750V
4. DC voltage up to 1000V
5. Resistance up to 200kΩ
6. Frequency up to 40kHz
7. Display hold function
8. Audible continuity test
9. Over range indication
10. Maximum recording mode
11.Confirm to the IEC-1010-1 ,UL 1244/UL3111, CE standard
12. CAT III, AC 750V, DC 1000V
13. Hand guard protection
14. Soft Carrying case
-------------------------------------------------------------
Digital Clamp-on Meter
1500A AC/2000 A DC + Bar Graph

Model:DCM-2608

Features :
1. 3  3/4  digit display (4000 Counts)
2. AC current up to 1500A;DC current up to 2000A
3. AC voltage up to 750V;DC voltage up to 1000V
4. Resistance up to 40MΩ
5. Frequency up to 400kHz
6. Capacitance measurement
7. Audible continuity test / Diode test
8. Over range indication
9. Max/Min recording mode
10. Relative mode to read offset values (Zero Ωkey)
11.Peak hold for transient measurement
12.Confirm to the IEC-1010-1 , UL1244/UL3111, CE standard
13. CAT III, AC 750V, DC 1000V
14. Hand guard protection
15. Soft Carrying case.

Certificate:CE
  • This model has been discontinued and replaced by new model DCM-2608D.
  •  
  • DCM-2605 SPECIFICATIONS:
    • DC Voltage Ranges: 1000V,±(0.5%+1dgt)
    • AC Voltage Ranges: 200V,750V, ±(1.5%+4dgts)
    • AC Current Ranges: 200A,1000A, ±(1.5%+5dgts)
    • DC Current Ranges: 200A,1000A, ±(1.5%+5dgts)
    • Resistance Ranges: 200Ω,200KΩ, ±(1.0%+3dgts)
    • Continuity Test: Audible indication less than 30Ω
    • General
    • Power Requirement: One 9V battery
    • Dimensions: 10.9""x4.0""x1.9"" (277x102x49mm)
    • Weight: 18.9 oz/540g
    • Accessories: Test leads; soft carrying case, battery, and owners manual

 

  •  DCM-2608 SPECIFICATION:
    -Display: 3 3/4 digit(4000 counts), 9999 counts(Frequency Mode), 42 segment Analog bar graph and function/units sign annunciators.
    -DC Voltage Ranges: 400mV,4V,40V,400V,1000V, ±(0.5%+1dgt)
    -AC Voltage Ranges: 400mV,4V,40V,400V,750V,±(1.5%+4dgts)
    -AC Current Ranges: 200A,1500A,±(1.5~5%+5dgts)
    -DC Current Ranges: 200A,1000A,±(1.5~5%+5dgts)
    -Resistance Ranges: 400Ω,4kΩ,40kΩ,400kΩ,4000kΩ,40MΩ, ±(1.0%+4dgts)
    -Continuity Test: Audible indication
    -Polarity: Automatic (-) negative polarity indication.
    -Overrange indication: MSD (Most Significant Digit) blinks.
    -Lower Batery indication: the ""battery sign"" is displayed when the battery voltage drops below accurate operating level.
    -Measurement rate: 2/sec. nominal 1/sec. Capacitanc and Frequency mode. 20/sec. Analog display.
    -Operating Environment: 0 °C to 50 °C at < 70% RH
    -Storage Environment: -20 °C to 60 °C at 80% RH
    -Temperature Coefficient: 0.1 x (specified accuracy)/ °C ( < 18 °C or > 28 °C)
    -Auto Power Off: 30 minutes after rotary switch or mode changes.
    -Altitude 6561.7 Feet (2000M)
    -Power : One standard 9-Volt battery, NEDA 1604, IEC 6f22, jis 006P
    -Battery Life: 100 Hours typical with alkaline battery.
    -Jaw Opening Capacity: 57 mm conductor , 70 x 18 mm bus bar.
    -Weight: Approx. 18.9 OZ/ 540 g grms (including battery).
    -Dimensions: 10.9""x4.0""x1.9"" (277x102x49mm)
    -Accessories: Test leads; soft carrying case, battery, and owners manual