OS-1022 Hand-held 20MHz Digital Storage Oscilloscope with color LCD dispaly Product ID: OS-1022

20MHz Handheld Oscilloscope
2-Channel Lightweight Digital Storage Oscilloscope with Color LCD Display

1. Autoscale
2. 20 Automatic Measurements
3. 3 in 1(DSO+Multimeter+Cymometer)
4. Bandwidth: 20 MHz
5. Support USB for data transmission to PC
6. Replaceable li-ion battery back up (6 hours)
7. USB Flash Disk Storage
8. FFT

How to use handheld oscilloscope? Tecpel Video demonstration. [iframe src=""http://www.youtube.com/embed/9HIJnnJ8icE"" frameborder=""0"" width=""560"" height=""315""][/iframe]

Category: Oscillosocpes

 Model  : OS-1022

 Bandwidth : 20MHz 

 Sample rate(Real time) : 100MS/s  

 Horizontal Scale(S/div) : 5ns/div~100s/div,step  by 1~2.5~5  

 Rise time(at input,typical) : ≤17.5ns

 Channels : Dual

 Display : 3.7 inch color display with TFT panel(640×480 pixels)

 Dimension : 180mm(L)x115mm(H)x40mm(W)

 Weight : 645g

Model Name  OS-1022
 Bandwidth  20MHz
 Sample Rate ( Real time )  100MS/s
 Horizontal Scale(S/div)  5ns/div~100s/div
 step by 1~2.5~5
 Rise time(at input, typical)  ≤17.5ns
 Display  3.7 inch color display with TFT panel(640×480 pixels, 65535 colors)
 Channels  Dual
 Input impedance  1MΩ±2%,in parallel with 20pF±3pF
 Record length  Max. 6000 points on each channel
 Interpolation  (sin x)/x
 Probe attenuation factor  1X,10X
 Input coupling


 DC accuracy(Average)  Average>16:±(5% reading+0.05div) for △V
 Vertical Sensitivity  5mV/div~5V/div (at input)
 Vertical resolution (A/D)  8 bit(2 channels simultaneously )
 Max. Input Voltage  400V (PK-PK) (DC + AC PK-PK, 1MΩ input impedance, Probe attenuation 10:1)
 Trigger Type  Edge, Video, Alternate
 Trigger Mode  Auto, Normal, Single
 Trigger level  ±6 divisions from screen center
 Acquisition modes  Sample, Peak Detect and Average
 DC gain accuracy  ±3%
 Automatic Measurement  Vpp,Vavg,RMS,Frequency,Period,Vmax,Vmin,Vtop,Vbase,Width,Overshoot
 ,Preshoot,Risetime,Falltime,+Width,-Width,+Duty,-Duty, Delay A→B
 Delay A→B
 Waveform math  +, -, ×, ÷, FFT
 Waveform storage  4 waveforms
 Bandwidth  20MHz
 Phase difference  ±3 degrees
 Communication interface  USB
 Power supply  100V-240V AC, 50/60Hz
 Li-ion battery  7.4V, 6 hours operation
 Multimeter specifications
 Full scale reading  3 3/4 digits (Max.4000-count)
 Input Impedance  10 MΩ
 Capacitance  51.2nF-100uF:±(3%±3 digit)
 Voltage  VDC:400mV,4V, 400V: ±(1±1digit) Max.input:DC 1000V, VAC:4V,40V,
 Frequency:40Hz-400Hz, Max:input:AC 750V(virtual value)
 Current  DCA:40mA, 400mA:±(1.5%±1 digit) 10A:±(3%±3digit)
 DAA:40mA±(1.5%±3digit) 400mA:±(2±1digit) 10A:±(3%±3digit)
 Impedance  400Ω:±(1%±3digit), 40Ω
 General specifications
 Interface  USB Data Cable (Transfer waveform data to a PC)
 Power  Supply:100V~240V AC,50/60Hz   DC input: 8.5VDC, 1500mA 
 Battery: 6 hours
 Dimension  180mm x 115mm x 40mm
 Weight  645g