CA-600 AC/DC Current Transducer /Transmitter Product ID: CA-600,
DC Current Range: 0-1000A±(1.5~3.5%+3A)
AC Current Range: 0-1000A±(1.5~3.5%+3A)
Output: 0-1V rms or DC with>=1MΩ input impedance
Transfer Rate: 1mV/1A
Overload Protection: 1200A for 60 seconds maximum.
-----------------------------------------------------------------------
General
Jaws Opening Capability: 57mm Conductor, 70 x 18 mm bus bars
Power Requirement: One 9V battery
Dimensions: 9.6"x3.9"x1.6" (244x100x40mm)
Cable length :
The length of the cable is curled wire 2.63 Feet (80 cm ) and extension is able to be 4.3 Feet ( 130 cm ) approx.
- CA600
- DC/AC Current Clamp Adapter
- Model：CA-600
- Features :
- Coverts any DMM to a current clamp
- Measure current without disconnecting circuit under test
- AC/DC 600A capability
- Dual Hall-effect sensors
- Accuracy DC:±2%+2A AC: ±3%+2A (50~400Hz)
- For use with any multi-meter at 200mV or 2V ranges for direct readout.
- Input impedance at least 1MΩ
- Power on indicating
- Zero adjustment knob to compensate the hysteresis effect in
- DC Measurements.)
- Transformer ratio:1000:1
- Output 1mV/A
- Jaw opening capability:30mm conductor
- Confirm to Safety:IEC 1010-1, IEC 1010-2-032,UL,CE approved.
- Low battery indication Model : CA 600
- CA600
- Specifications :
- Measurement range:
- 600A DC or AC
- Accuracy:
- ±(2% reading +2A)
- Frequency Response (AC):
- 50Hz to 400Hz
- Input Resistance:
- 10kHz typical
- Maximum Conductor Size:
- 1.1"" (30mm)
- General:
- Power Requirement:
- 9V battery
- Dimensions
- 7x2.75x1.3(178x70x33mm)
- Weight:
- 11 oz. (290g)
- Accessories:
- Battery, owners man
- CA1000D FEATURES:
- 1000Amp AC/DC Clamp Adapter
- Model：CA-1000D
- Features :
- 1000A AC or DC Current Clamp
- Measure current without disconnecting circuit under test
- Measure to 1000A DC or AC
- Outputs 1mV per Amp, operates on 2V range of any DMM
- CA1000D SPECIFICATIONS:
- Model : CA-1000D
- Click here for larger image
- Specifications :
- DC Current Range:
- 0-1000A±(1.5~3.5%+3A)
- AC Current Range:
- 0-1000A±(1.5~3.5%+3A)
- Output
- 0-1V rms or DC with>=1MΩ input impedance
- Transfer Rate:
- 1mV/1A
- Overload Protection
- 1200A for 60 seconds maximum.
- General
- Jaws Opening Capability:
- 57mm Conductor, 70 x 18 mm bus bars
- Power Requirement:
- One 9V battery
- Dimensions:
- 9.6""x3.9""x1.6"" (244x100x40mm)
- --------------------------------------------------------------------------------
- TECPEL CO., LTD
- NO, 13, ALLEY 5, LANE 31 CHUNG-TEH STREET,
- TAIPEI 110, TAIWAN, R.O.C.
- E-MAIL: sales@tecpel.com Web-site: http://www.tecpel.com
- TEL:2-27375866 FAX:886-2-
- CA-06 (Option)
- BNC- Female 4mm Banana post adapter for receiving Signal output from CA-60 and able to be monitored by oscilloscope.