60MHz 2-Channel Color Digital Storage Oscilloscope(OS-2062) Product ID: OS-2062


60MHz Handheld Oscilloscope   OS-2062

This handheld oscilloscope multimeter is a great tool for industrial troubleshooting, Auto diagnostic and field service applications at affordable price. Make sure your measurements precisely tested by using this rugged, small and light weight tool.

 It can be operated by either battery powered or 8.5V/1500mA DC adapter(Standard Accessoriesl). It has optically sealed USB transfer, and can measure DC V up to 1000V, AC up to 750V, frequency up to 60MHz and etc.

Key Features:

- 2 in 1(DSO+Multimeter)
- Autoscale
- 20 automatic measurements
- Bandwidth: 20MHz-100MHz
- Support USB for data transmission to PC
- Replaceable li-ion battery back up (6 hours)
- USB flash disk storage
- Waveform record & replay
- Dimension: 180mm(L)×115mm(H)×40mm(W)
- Weight: 645g


How to use handheld oscilloscope? Tecpel video demonstration. [iframe src=""http://www.youtube.com/embed/9HIJnnJ8icE"" frameborder=""0"" width=""560"" height=""315""][/iframe]

Category: Oscillosocpes

SPECIFICATIONS  60MHz handheld Oscilloscope

Model Name OS-2062
Bandwidth 60MHz
Sample Rate ( Real time ) 250MS/s
Horizontal Scale(S/div) 5ns/div~100s/div
step by 1~2.5~5
Rise time(at input, typical) ≤17.5ns
Display 3.7 inch color display with TFT panel(640×480 pixels, 65535 colors)
Channels Dual
Input impedance 1MΩ±2%,in parallel with 20pF±3pF
Record length Max. 6000 points on each channel
Interpolation (sin x)/x
Probe attenuation factor 1X,10X
Input coupling


DC accuracy(Average) Average>16:±(5% reading+0.05div) for △V
Vertical Sensitivity 5mV/div~5V/div (at input)
Vertical resolution (A/D) 8 bit(2 channels simultaneously )
Max. Input Voltage 400V (PK-PK) (DC + AC PK-PK, 1MΩ input impedance, Probe attenuation 10:1)
Trigger Type Edge, Video, Alternate
Trigger Mode Auto, Normal, Single
Trigger level ±6 divisions from screen center
Acquisition modes Sample, Peak Detect and Average
DC gain accuracy ±3%
Automatic Measurement Vpp,Vavg,RMS,Frequency,Period,Vmax,Vmin,Vtop,Vbase,Width,Overshoot
,Preshoot,Risetime,Falltime,+Width,-Width,+Duty,-Duty, Delay A→B
Delay A→B
Waveform math +, -, ×, ÷, FFT
Waveform storage 4 waveforms
Bandwidth 20MHz
Phase difference ±3 degrees
Communication interface USB
Power supply 100V-240V AC, 50/60Hz
Li-ion battery 7.4V, 6 hours operation

Multimeter specifications
Full scale reading 3 3/4 digits (Max.4000-count)
Input Impedance 10 MΩ
Capacitance 51.2nF-100uF:±(3%±3 digit)
Voltage VDC:400mV,4V, 400V: ±(1±1digit) Max.input:DC 1000V, VAC:4V,40V,
Frequency:40Hz-400Hz, Max:input:AC 750V(virtual value)
Current DCA:40mA, 400mA:±(1.5%±1 digit) 10A:±(3%±3digit)
DAA:40mA±(1.5%±3digit) 400mA:±(2±1digit) 10A:±(3%±3digit)
Impedance 400Ω:±(1%±3digit), 40Ω

General specifications
Interface USB Data Cable (Transfer waveform data to a PC)
Power Supply:100V~240V AC,50/60Hz DC input: 8.5VDC, 1500mA
Battery: 6 hours
Dimension 180mm x 115mm x 40mm
Weight 645g