Function Generator(FG15) Product ID: FG15

New FG15, 15MHz Function Generator can generator extremely clean and low
distortion waveform output . It comes with 90MHz TTL output , optional 2GHz
frequency counter etc . The unique design is to make the rotary menu driven
pop up and down functions for easy operation . Please refer to how pure the
waveform is as the attached files.

Category: Function Generators
Certificate:CE
  • FG15 FEATURES
    • Rotary menu driven pop up and down function for easy operation
    • TTL output up to 90 MHz
    • Low noise signal source
    • Optional 2GHz frequency counter
    • Triangle , Square, Sine ,TTL Sync out, Asymmetry, Ramp up ,Log waveforms and DC
    • Duty cycle up to 15MHz for TTL ,resolution 0.1%
    • Amplitude attenuation -60db
  • FG15 SPECIFICATIONS
    • Function Generator
    • Waveforms: Triangle ,Square,Sine ,TTL Sync out,Asymmetry,Ramp up,Log Waveforms and DC
    • Function Output Range: 0.2Hz~15MHz
    • TTL output range: 0.2Hz~90MHz
    • Resolution: 4 Digits
    • Symmetry/duty cycle: 20 % to 80 % up to 1MHz,40 % to 60 % up to 10MHz
    • Impedance: 50 Ohm +/- 5 %
    • Amplitude: +/- 10V into open circuit +/- 5V into 50 ohm
    • Attenuation: 0dB,-20dB,-40dB,-60dB
    • DC offset: +/- 10V into open circuit +/- 5V into 50 Ohm
    • Square wave
    • Rise or Fall time: < or = 8804;15nS at full amplitude (50 Ohm)
    • Aberrations:Triangle linearity error: 99% up to 100KHz
    • Sine wave distortion: < -30dB when f < or = 2MHz,2MHz
    • Sync output (TTL pulse) : TTL logic clock 0.2Hz~15MHz output impedance 50 Ohm
    • Sweep:Width : Lin or Log During selecting range
    • Sweep rate: 0.2Hz~100Hz(5sec~10msec)
    • VCG characteristics :Control range
    • Max input 0 to 1.8Vdc for selecting range
    • Input impedance: 2K Ohm +/- 1%
    • Func Out protection : 20V peak on ""Func Out"" terminals
    • Frequency counter : Range : 0.2Hz~100MHz(standard)
    • 100MHz~2GHz(option)
    • Accuracy: ±5count+time base error
    • Resolution: 4 Digits for internal counter
    • 7 1/2 Digits for external counter
    • LPF : Auto or manual mode
    • Time base: 36.864MHz +/- 25PPM(23.5 ±5 deg C)
    • Optional TCXO timebase( +/- 2.5ppm)
    • Attenuation: x1(ATT off);x20(ATT on)
    • Sensitivity :
    • Standard: 0.2Hz~75MHz/-22dbm@ 50 Ohm typical
    • 76M~100MHz/-15dbm @ 50 Ohm typical
    • Option: 100M~2GHz/-10dbm @ 50 Ohmtypical
    • Duty cycle measurement :(TTL level only) :
    • Resoulution: 3 Digits
    • Accuracy: 3 % +/- 10counts 5Hz< f< 10MHz
    • General :
    • Power : AC 115 / 230V ; 50 / 60Hz
    • Operating temp: 0 deg to 40 deg C ; < or = 80% RH
    • Storage temp: -20 deg C to 70 deg C.
    • Dimensions 330mm x 220mm x 150mm
    • (11.8"" x 8.7"" x 5.9"" )(Dx W x H)
    • Weight: 5 kgs
    • Accessories: Power cord ╳ 1