Earth Resistance Tester(ERT 580)

ERT 580 Earth Resistance Tester
Features:
1. Measures down to 0.01 Ohm.
2. 3 Earth Ranges: 20, 200, 2000 Ohm
3. One test current of 2 mA RMS.
4. Indication if reistance of auxiliary spikes resistance is within range.
5. Two or three-terminal measurement.
6. Three-terminal measurement for earth electrode testing.
7. Large LCD display.
8. Data hold function.
9. Calibration performed with supplied test leads (3 T fully compensated).
10. Meausre eath voltage up to 200V AC.
11. Simple to use and lowe power.
12. Open loop indication with "" 1 "" (MSD) on display and LED Light off.
13. Lightweight, robust and compact design.
14. Low Battery Indication.
15. "" O-Ring"" Sealed case for outdoor usage and better protection.
16. Standard accssories for 3T and 2T.

high voltage proximity tester(HVP-275)

HVP-275 Features

‧ Sealed by "" O"" Ring.
‧ 8 voltage settings: 240Vac, 2kV, 6kV, 11kV, 22kV, 33kV,
132kV, and 275kV
‧ High bright LEDs visual indication
‧ Sound indication
‧ Easy-to-proov method
‧ Self-test selection
‧ Use 3 x 1.5V “C” batteries
‧ High impact nylon casing
‧ Non-contact work by proximity
‧ Compatible with most link sticks
‧ Light weight, robust, & compact
‧ Suitable for indoor and outdoor use
‧ Detect low voltage on any systems
‧ Easy access to batteries
‧ No special parts needed
‧ Three-year warranty
‧ Simple and efficient to use

Analog High Voltage Meter(Tecpel HVP-40M)

Analog High Voltage Test Probe test mete
 
HVP-40M Features:
DC 40KV CAT II Pollution 2
600M Ohm Impedance
25KV ± 2%, 40KV ± 3%
T.C. 200 ppm/°C.
Positive Polarity only.
Resolution 1KV
No Need power.
CE,   IEC1010

Phase Sequence Indicator(PHS 863)

PH 863 Phase Sequence Indicator
1. Two functions in one unit incluidng open phase and phase sequence.
2. Large size alligator clips : able to clip on switch-board terminals easily.
3. Identify 3 phase sequence and open phase check
4. Applications: This model is ideal for installing conveyor lines, pump systems and interconnected driverss.
5. Safety Approval : CE marks EN 6101-1 CAT. III. EN 61010-2-031

Digital Multifunction and Insulation Continuity-Voltage Tester(DIM-572)

Digital Multifunction and Insulation Continuity-Voltage tester

DIM-572 Features:



Originally designed unique products have features ranging from insulation resistance testing.
Voltage (AC - DC) measurement with automatic hold fcitlity, continuity test with a short circuit current of minimum 200 mA.
For Insulation Testing, the user can select the test voltage of 250V, 500V AND 1000VDC. It is utilized to accept a selection and to disable the Energy Save feature.
The Ohm Key is a multi-purpose key, you press it to select the Continuity Test, then you use it to Auto-null the test leads and fuse.
There is an automatic voltmeter which is accessed after start up.
The Voltmeter is the default mode of this instrument

Model: DIM-572

 Digital Multifunction and Insulation Continuity-Voltage Testes



A new generation of modern digital multifunction testers is born. This tester has a range of new features not even found in expensive advanced test equipments. Not only rugged, but designed to excel in harsh environment, still, remaining low cost and affordable. It can be operated with rechargeable batteries, alkaline or low cost general purpose batteries. This unique product has features ranging from Insulation Resistance Testing, Voltage(ac-dc) measurements with Automatic Hold facility, Continuity Test with a short circuit current of minimum 210mA. Two very unique features are found on this multifunction model DIM-572.



MOV and Gas Arrester Testing

Today, most equipments and electrical installations are protected by MOVS and

Gas Arresters, or a combination of these.



This tester can test the devices to establish if it is still operating correctly or not.

Energy conservation is featured on all these new advanced product. “ Auto-power-off” limits the test duration to about 10 seconds to save energy. “Auto-power-off” can be turned off by simply keeping the ON/TEST key depressed for more than 3 seconds while starting a test. This new tester has no moving parts. All calibration are saved internally in a non volatile memory. Calibration can be done at any calibration facility in the world without the need for dedicated calibration equipment. This makes tester easier to maintain and lower the cost of calibration and maintenance. The calibration interval can be extended without much problem. They comply to all the latest regulations, including UK.This tester feature heavy duty protections in its circuitry. Safety features are built-in. For example, should you connect the leads onto a Voltage, AC or DC, the tester will detect it. Switch itself ON and show the voltage present on its leads. The tester will also buzz to inform the user of a safety hazard. We bring a similar solution in the case where the user tries to start a test and measure on a live circuit. If this happen, the tester will disable testing until the circuit has been isolated. This tester can function with rechargeable or Ni-Cad or normal batteries.The circuitry can acept a wide range of power and still perform properly

High Voltage Proximity Detector(HVP-275)

HVP-275 Features

‧ Sealed by "" O"" Ring.
‧ 8 voltage settings: 240Vac, 2kV, 6kV, 11kV, 22kV, 33kV,
132kV, and 275kV
‧ High bright LEDs visual indication
‧ Sound indication
‧ Easy-to-proov method
‧ Self-test selection
‧ Use 3 x 1.5V “C” batteries
‧ High impact nylon casing
‧ Non-contact work by proximity
‧ Compatible with most link sticks
‧ Light weight, robust, & compact
‧ Suitable for indoor and outdoor use
‧ Detect low voltage on any systems
‧ Easy access to batteries
‧ No special parts needed
‧ Three-year warranty
‧ Simple and efficient to use

Personal Safety Voltage Detector(SVD-588)

Warning Proximity of AC Voltage
Water Proof (sealed to Ip65)
Easty to wear on body, Belt, Helmet.
Ultra High bright LED indicaiton
Test and Diagnostic Circuitry.
Freiendly priority alert reporting.
Circuit Test Funciton.
Hight impact type casing.
Differnt alerting sound and light.
removable neck belt.
suitable for indoor and outdoor use.
Detect voltage on any systems.
Low battery indiation.,
All OK test indication.
Ultra low power consumption.

Cable Tracer (Tone Generator / Amplifier Probe)(CT-581)

Amplifer Probe (CT-581A)
The amplifier probe indentifies and traces wires or cables within a group.

Without damaging the insulation
1. Works with any Tone Generator to indentify wires.
2. Adjustable volume to suit work environment.
3. A plug receptable for headset or hand set.
4. Work with 9V battery and come with soft carrying case

Tone Generator( CT-581G)
1. A great tool for locating and identifying cable pairs or individual conductors.
2. Serves as a continuity and polarity tester
3. A three-colored LED display for test result.

Digital Loop Impedance PSC Tester(LP-2811)

LP-2811
Loop Impedance Range L - E , L - N: 20/200/2000 Ohm (Auto-Range)
Loop Impedance Test Current : 12A at 230V/50Hz
Voltage Measurement L-N, L-E : 80 to 250V AC/50Hz
Earth wire / path Return Resistance : 20/200/2000 Ohm (Auto-Range)
Neutral Wire Resistance : 20/200/2000 Ohm (Auto-Range)
Line Wire Resistance&Transformer Windings : 20/200/2000 Ohm (Auto-Range)
PSC Current (L - N) Max : 3kA
PSC Current (L - N) Max : 3kA
Operating Voltage : 230V +/-20%Hz
Dimensions : 170(L) x 120(W) x 95(D)mm
Weight : 635g
Power Source : 1.5V(AA) x 8 Batteries