Clamp-on Meters

Digital Clamp-on Meters
1000A AC/DC Amp +Frequency
Model：DCM 2605

Features :

1. 3 1/2 digit display
2. AC/DC current up to 1000A
3. AC voltage up to 750V
4. DC voltage up to 1000V
5. Resistance up to 200kΩ
6. Frequency up to 40kHz
7. Display hold function
8. Audible continuity test
9. Over range indication
10. Maximum recording mode
11.Confirm to the IEC-1010-1 ,
UL 1244/UL3111, CE standard
12. CAT III, AC 750V, DC 1000V
13. Hand guard protection
14. Soft Carrying case


Digital Clamp-on Meter
1500A AC/2000 A DC + Bar Graph
Model：DCM 2608
Features :

1. 3  3/4  digit display (4000 Counts)
2. AC current up to 1500A;DC current up to 2000A
3. AC voltage up to 750V;DC voltage up to 1000V
4. Resistance up to 40MΩ
5. Frequency up to 400kHz
6. Capacitance measurement
7. Audible continuity test / Diode test
8. Over range indication
9. Max/Min recording mode
10. Relative mode to read offset values (Zero Ωkey)
11.Peak hold for transient measurement
12.Confirm to the IEC-1010-1 ,
UL1244/UL3111, CE standard
13. CAT III, AC 750V, DC 1000V
14. Hand guard protection
15. Soft Carrying case.

AC 1000A True RMS Clamp on
Power Meter
Model : DPM-041

Features:
Power measure of Active power (KW), Reactive power
(KVAR), Apparent power (KVA), Power Factor (PF)
PF (cos O) for 3O4W, 3O3W, 1O2W, 1O3W
Triple display: KW+V+A easy to read
AC current up to 1000A, AC voltage up to 600V
INRUSH (100mS), HOLD and PEAK functions
MAX and MIN recorded functions
Auto power off (10 mins), Black-light
Dimensions of conductor: O35mm
EN61010-1 Approval. Over-Voltage Category III 1000

The digital Clamp Meter is an electrical meter with integral AC current clamp. In order to use it properly, the normal usage is only one conductor passed through the probe. With over 20 years’ experiences, our products have been accepted by some well-known international customers. The clamp meter is often equipped with a device plugged in between the power outlet and the device to be tested.

The followings are the features of our DCM-2600 and DCM-2606 products:

1. DCM-2600:

• 1000A AC Amp + 2000M Ohm


• 3 1/2 digit display


• AC current up to 1000A


• AC voltage up to 750V


• DC voltage up to 1000V


• Clamp Meter Resistance up to 2000M Ohm


• Audible continuity test


• Over range indication


• Maximum recording mode


• Confirm to the IEC-1010-1


• Ul1244/UL3111, CE standard


• Hand guard protection Model : DCM 2600


• Carrying case Click here for larger image.

2. DCM-2606:

• 1000A Amp AC/DC True R.M.S.


• 3 3/4 digit display with bargraph


• AC/DC current up to 1000A


• AC voltage up to 750V


• DC voltage up to 1000V


• Display hold function


• True-RMS reading


• Diode test


• Carrying case


• Audible continuity test


• Overrange indication


• Frequency up to 400KHz


• Capacitance measurement


• Resistance up to 40M ohm


• Relative mode to read offset values (Zero △Key)


• Peak hold for transient measurements


• Max/Min recording mode Model : DCM 2606


• Confirm to the IEC-1010-1,UL1244/UL3111, CE standard


• Hand guard protection

How to use a clamp meter? Tecpel Video Demonstration. [iframe src=""http://www.youtube.com/embed/mTIO87hY2ps"" frameborder=""0"" width=""420"" height=""315""][/iframe]

The TECPEL DCM-036A is compact and light weight designed AC Clamp Meter provides you the ability to work easily in narrow places, and makes it convenient to keep track of your measurements for further analysis. The range button can be easily switched between manual and auto ranging. Auto-power-off maximizes its battery life. Its small size just fits in your hand. I. It also measures  AC Amps, AC Volts, DC Volts, resistance, continuity, and diode check. This meter is CATIII 600 rated.

3999 counts digital display
Auto Ranging
Auto power off feature
Overload protection
Conductor Jaw opening capability : 30 mm
Safety Input Jacks
Safety Test Leads
Safety regulation: IEC/EN61010-1, CATIII 600V,
IEC/EN61010-2-32, CATIII 300V, CE approved.
Dimensions: 200 mm(H) x 65 mm(W) x 39mm(D)
Weight: Approx. 200 g

600A DC/AC True RMS Industrial Clamp Meter

• Maximum reading of 9999


• ACA/DCA measurement up to 600.0A


• Inrush current (100mS) mode, for measuring start current for motors, lighting, etc.


• Good for PWM trouble shooting and in Noisy environment measurement


• Improved low current measurement accuracy


• Temperature Compensation Current sensor


• HOLD/PEAK HOLD, MAX/MIN, A-Hz and V-Hz function


• Auto shut-off maximizes battery life


• Large, backlit display easy to see


• Dimensions of conductor: Ø35mm


• EN61010-1 Approval. Over-Voltage Category III 1000V