AC/DC Current Transducer(CA600, CA1000D)

AC / DC mA Current Clamp(CA-60)

1. This miniature clamp meter features two Hall effect sensors
2. For use with any multimeter with 200mV or/and 2V ranges for direct readout input impedance of least 1M ohm.
3. High conversion factor for low DC and AC mA measurement.
4. With the small jaw size it can fit into tight space in circuit panel or wire bundle to take the reading
5. The high frequency response at 20 kHz is useful for waveform monitoring on an oscilloscope.
6. Zero adjustment is made easy by just pushing the ZERO button.
7. It is best for locating small signal, industrial control, battery leakage,and automotive usage

AC / DC mA Current Clamp transmitter(Tecpel CA-60)

1. This miniature clamp meter features two Hall effect sensors
2. For use with any multimeter with 200mV or/and 2V ranges for direct readout input impedance of least 1M ohm.
3. High conversion factor for low DC and AC mA measurement.
4. With the small jaw size it can fit into tight space in circuit panel or wire bundle to take the reading
5. The high frequency response at 20 kHz is useful for waveform monitoring on an oscilloscope.
6. Zero adjustment is made easy by just pushing the ZERO button.
7. It is best for locating small signal, industrial control, battery leakage,and automotive usage

AC/DC Current Transducer(CA600, CA1000D)

Digital Clampmeters(DCM 2605, DCM 2608)

Digital Clamp-on Meters
1000A AC/DC Amp +Frequency
Model:DCM 2605

Features :

1. 3 1/2 digit display
2. AC/DC current up to 1000A
3. AC voltage up to 750V
4. DC voltage up to 1000V
5. Resistance up to 200kΩ
6. Frequency up to 40kHz
7. Display hold function
8. Audible continuity test
9. Over range indication
10. Maximum recording mode
11.Confirm to the IEC-1010-1 ,
UL 1244/UL3111, CE standard
12. CAT III, AC 750V, DC 1000V
13. Hand guard protection
14. Soft Carrying case


Digital Clamp-on Meter
1500A AC/2000 A DC + Bar Graph
Model:DCM 2608
Features :

1. 3  3/4  digit display (4000 Counts)
2. AC current up to 1500A;DC current up to 2000A
3. AC voltage up to 750V;DC voltage up to 1000V
4. Resistance up to 40MΩ
5. Frequency up to 400kHz
6. Capacitance measurement
7. Audible continuity test / Diode test
8. Over range indication
9. Max/Min recording mode
10. Relative mode to read offset values (Zero Ωkey)
11.Peak hold for transient measurement
12.Confirm to the IEC-1010-1 ,
UL1244/UL3111, CE standard
13. CAT III, AC 750V, DC 1000V
14. Hand guard protection
15. Soft Carrying case.