Digital Clampmeters(DCM 2605, DCM 2608) Product ID: DCM 2605, DCM 2608

Digital Clamp-on Meters
1000A AC/DC Amp +Frequency
Model:DCM 2605

Features :

1. 3 1/2 digit display
2. AC/DC current up to 1000A
3. AC voltage up to 750V
4. DC voltage up to 1000V
5. Resistance up to 200kΩ
6. Frequency up to 40kHz
7. Display hold function
8. Audible continuity test
9. Over range indication
10. Maximum recording mode
11.Confirm to the IEC-1010-1 ,
UL 1244/UL3111, CE standard
12. CAT III, AC 750V, DC 1000V
13. Hand guard protection
14. Soft Carrying case


Digital Clamp-on Meter
1500A AC/2000 A DC + Bar Graph
Model:DCM 2608
Features :

1. 3  3/4  digit display (4000 Counts)
2. AC current up to 1500A;DC current up to 2000A
3. AC voltage up to 750V;DC voltage up to 1000V
4. Resistance up to 40MΩ
5. Frequency up to 400kHz
6. Capacitance measurement
7. Audible continuity test / Diode test
8. Over range indication
9. Max/Min recording mode
10. Relative mode to read offset values (Zero Ωkey)
11.Peak hold for transient measurement
12.Confirm to the IEC-1010-1 ,
UL1244/UL3111, CE standard
13. CAT III, AC 750V, DC 1000V
14. Hand guard protection
15. Soft Carrying case.

Category: Clamp-on transducer
Certificate:CE
  • DCM 2605 SPECIFICATIONS:
    • Specifications :
    • DC Voltage Ranges: 1000V,±(0.5%+1dgt)
    • AC Voltage Ranges: 200V,750V, ±(1.5%+4dgts)
    • AC Current Ranges: 200A,1000A, ±(1.5%+5dgts)
    • DC Current Ranges: 200A,1000A, ±(1.5%+5dgts)
    • Resistance Ranges: 200Ω,200KΩ, ±(1.0%+3dgts)
    • Continuity Test: Audible indication less than 30Ω
    • General
    • Power Requirement: One 9V battery
    • Dimensions: 10.9""x4.0""x1.9"" (277x102x49mm)
    • Weight: 18.9 oz/540g
    • Accessories: Test leads; soft carrying case, battery, and owners manual

 

  •  DCM 2608 SPECIFICATION

    Display: 3 3/4 digit(4000 counts), 9999 counts(Frequency Mode), 42 segment Analog bar graph and function/units sign annunciators.

    DC Voltage Ranges:

    400mV,4V,40V,400V,1000V, ±(0.5%+1dgt)

    AC Voltage Ranges:

    400mV,4V,40V,400V,750V,±(1.5%+4dgts)

    AC Current Ranges:

    200A,1500A,±(1.5~5%+5dgts)

    DC Current Ranges: 200A,1000A,±(1.5~5%+5dgts)

    Resistance Ranges: 400Ω,4kΩ,40kΩ,400kΩ,4000kΩ,40MΩ, ±(1.0%+4dgts)

    Continuity Test: Audible indication

    Polarity: Automatic (-) negative polarity indication.

    Overrange indication: MSD (Most Significant Digit) blinks.

    Lower Batery indication: the ""battery sign"" is displayed when the battery voltage drops below accurate operating level.

    Measurement rate: 2/sec. nominal 1/sec. Capacitanc and Frequency mode. 20/sec. Analog display.

    Operating Environment: 0 &degC to 50 &degC at < 70% RH

    Storage Environment: -20 &degC to 60 &degC at 80% RH

    Temperature Coefficient: 0.1 x (specified accuracy)/ &degC ( < 18 &degC or > 28 &degC)

    Auto Power Off: 30 minutes after rotary switch or mode changes.

    Altitude 6561.7 Feet (2000M)

    Power : One standard 9-Volt battery, NEDA 1604, IEC 6f22, jis 006P

    Battery Life: 100 Hours typical with alkaline battery.

    Jaw Opening Capacity: 57 mm conductor , 70 x 18 mm bus bar.

    Weight: Approx. 18.9 OZ/ 540 g grms (including battery).

    Dimensions: 10.9""x4.0""x1.9"" (277x102x49mm)

    Accessories: Test leads; soft carrying case, battery, and owners manual

 http://www.tecpel.com/series4.html
Get more details for current clamp transmitter