LCR-614 Hand-held LCR meter 10KHz Product ID: LCR-614

LCR-614-10KHZ-handheld-LCR meter

With its advanced impedance test technology, TECPEL has launched New handheld LCR meters. This series currently possess the most powerful functions and outstanding performance in this industry comparable with bench LCR meters. Meanwhile it is the achievement of TECPEL after years of efforts and research in the passive-component testing field.
This LCR-614 apply the ultra-low power consumption design and high density SMD assembly techniques and can simultaneously display primary and secondary parameters on a LCD display with backlight. The dual-color shell is gorgeously once shaped; and functions are easy to operate. The test frequency is up to 10 kHz, the readings of primary parameter 40,000 counts and the resolution of dissipation factor 0.0,001. Accurate and convenient measurements of passive-components can be achieved in different occasions for a long time.
In order to meet different market demand, multiple signal level are increased on LCR-614. The test accuracy can reach 0.25%. With USB interface, This LCR-614 can conveniently communicate with a PC and be remotely controlled by a PC. In order to satisfy the increasing test requirements for SMD and balance the different needs for performance and price, two types of 4-terminal Kelvin test tweezers are equipped with accessories for users' choice.

Certificate:CE

■ Max. Basic accuracy: 0.25%

■ Maximum test signal frequency : 10kHz

■ Selectable test signal level

■ Enhanced protection capability of input terminal impact

■ 40000 counts for primary parameter, D/Q resolution 0.0001

■ Typical ultra-low consumption: 25mA

■ Innovatively compatible terminal configuration: 5-terminal test slot and 3-terminal banana jack

■ Intellectualized auto LCR function

■ AC test speed up to 4 meas/sec (DCR: 3 meas/sec), fast automatic range switch design

■ Constant 100Ω output impedance

■ Percentage display and 4-tolerance comparator: 1/5/10/20%

■ Battery charge in startup & shutdown

■ Test terminal protection function

■ Data-hold, Max./Min./Average value recording

■ Real-time function configuration selection and working condition hold capacity

■ Standard configuration Mini – USB communication interface and SCPI command set

■ Free FastAccess PC communication software on our website

■ Gorgeous dual-color cast shell

Brief Introduction

Handheld LCR Meter

Test Frequency:  100Hz, 120Hz, 1KHz, 10K Hz  

0.25%  Accuracy

 

Model LCR-614
Function
Test Parameter Primary parameters: L / C / R / Z
Secondary parameters: D / Q / R /θ/ ESR
Equivalent Circuit Series and Parallel
Parameter and
Equivalent Mode Hold, Auto
Ranging Mode Auto
Measurement
Terminals 3-terminal, 5-terminal
Measuring Speed 4meas/sec, 1.5meas/sec
Calibration Function Open, short
Comparator Function   1%, 5%, 10%, 20%
Input fuse 0.1A / 250V
Interface Mini-USB (virtual serial port)
Test signal
Test Frequency
100Hz, 120Hz, 1kHz, 10kHz,
Test Level 0.6Vrms  
Output Resistance 100Ω
Display
Display LCD Primary-Secondary dual display,  
Reading Max. Primary parameters: 40,000 digits, secondary parameters D/Q Minimum resolution: 0.0001
Basic accuracy 0.25%  
Measuring Range
L: 0.00μH - 1000.0H  
C  0.00pF - 20.000mF  
Z/R 0.0000Ω- 10.000MΩ
ESR 0.0000Ω- 999.9Ω
D 0.0000 - 9.999
Q 0.0000 - 9999
θ 0.00°- ±180.0°
Power Requirements
Battery model   9V alkaline battery
AC power adapter Input: 110V/50Hz, Output: 12V-15V(100Ω Load)
Standby Current Max.2μA 
Battery life 16 hours (typical) , new alkaline battery,  
Auto power off 5min, 15min, 30min, 60min, OFF available; Factory Default : 5min
Low voltage indicator :
When battery voltage drops below 6.8V, low voltage indicator turns on.